- USB BLASTER NOT DETECTED BY QUARTUS INSTALL
- USB BLASTER NOT DETECTED BY QUARTUS DRIVERS
- USB BLASTER NOT DETECTED BY QUARTUS UPDATE
If you installed a newer version of Quartus and want to rollback to an older version and also want to rollback the drivers, then make sure that you actually delete the drivers from System32 folder of your PC and then reinstall them from the Quartus directory. These steps should help you configure the control panel correctly and get started with using the board. USB-Blaster Download Cable User Guide first, or Google the subject for help. If the addresses are not marked correctly, then check the Environment Variables in your computer's system properties (QSYS_ROOTDIR, QUARTUS_ROOTDIR, SOPC_KIT_NIOS2), and edit them to point to the right directory.Ĭopy the contents of the control panel folder to C:\intelFPGA_lite\18.1\quartus\bin32 SOPC_KIT_NIOS2=C:\intelFPGA_lite\18.1\nios2eds QuartusBin64=C:\intelFPGA_lite\18.1\quartus\bin64 QuartusBin32= QuartusBin=C:\intelFPGA_lite\18.1\quartus\bin64 QSYS_ROOTDIR=C:\intelFPGA_lite\18.1\quartus\sopc_builder\bin QUARTUS_ROOTDIR=C:\intelFPGA_lite\18.1\quartus Quartus Version(TERASIC_DOWNLOAD.DLL)=0 OS=Win8 If the USB-Blaster is not selected automatically, press the Hardware Setup button and select USB-Blaster in the window that appears. Quartus Version(x32 Registry)=0 Quartus Version(圆4 Registry)=18.1 At the top, you must have selected USB-Blaster and JTAG mode. I faced issues connecting my FPGA with the control panel, which kept showering error messagesįirstly, check the system.txt file in the control panel folder, to make sure the locations are marked correctly. In Windows, no new USB device appears in device manager. I tried on 3 computers, and on both Windows and Linux. Everything on it (USB-OTG, remote desktop'ing into the board, serial, LEDs, accelerometer) works, except the JTAG Mini USB. Run the control panel executable file provided in the CD-ROM. I recently got an Altera DE10-Nano board.
USB BLASTER NOT DETECTED BY QUARTUS UPDATE
If yes, update the driver by choosing the location on your computer as C:\intelFPGA_lite\18.1\quartus\drivers Go to the device manager to check if there is a caution mark (yellow colored) on the USB blaster.
The Quartus installation should have installed the necessary USB blaster drivers. Make sure the version you choose supports Altera Cyclone IV FPGA
USB BLASTER NOT DETECTED BY QUARTUS INSTALL
When you try to install the drivers from older versions, an error message regarding missing hash tables pops up.ĭownload and install latest version of Quartus II Lite (right now, it's 18.1). So, if you're unable to use the programmer or the Control Panel, this is the reason. Here's how!Ī very important thing to note is that only v16.0 and later support the DE0 Nano board drivers in Windows 10. I solved them on my 64-bit Windows 10 operating system. Unfortunately, versions after v11.1 of Quartus II exhibit some errors while using with the DE0-Nano board. Select appropriate driver (C:altera91quartusdriversusb-blaster) - 4. Specify the path for USB Blaster driver - 3. Recognize the new hardware connected - 2. Use the USB cable co connect the USB connector on the DE0 board to a USB port on a computer. DE0-Nano FPGA Board is a great way tool for first time FPGA users to learn and understand the basics. Step 2: Install the USB Blaster Plug in the power cable. If the windows security window pops up check the always trust software from altera corporationbox and select install.
0 kommentar(er)
